Option A – Fiber Optic Ethernet CP10/11
Features:
The fibre optic ethernet option board (F) provides ethernet functionality over a fibre optic link. The board supports UDP or TCP/IP standards and can communicate up to 100Mbit/s.
Overview
- Ethernet functionality for Series II RTUs
- UDP or TCP/IP standards
- Auto negotiate 10/100Mbit/s
- MT-RJ Connector
- Fits CP-10, CP-11, CP-21, CP-30
Order Information
- COMMS-OPTION-A (Fibre Optic ETHERNET MTRJ - 10/100 Mbit for CP-11, option port 2/3)
Datasheets
| Product specification: | |
| General | |
| Baudrate | 100 Mbits/s |
| Compliance | Ethernet/IEEE 802.3u 100 Base-FX |
| Connector | MT-RJ |
| Internal Power Consumption | 75mA from +5VDC Bus on backplane |
| Number of Sockets | 4 |
| Functionality | Client (responding) and Server (Initiating) |
| Communication Format | Full duplex |
| Response Time | 5ms |
| RTU Hardware Required | CP-10/11 Port 2 or 3 |
| Protocols Supported | TCP/IP, UDP |
| Connection Cable | Multimode Fibre Optic |
| Environmental | |
| Operating Temperature | 0°C to 70°C / 32°F to 158°F |
| Storage Temperature | -40°C to 100°C / -40°F to 212°F |
| Operating Humidity | 5 to 98% RH non-condensing |
Provide Ethernet functionality over a fiber optic link.
