Option F – Fiber Serial Communications
Features:
The fibre optic option board (F) provides an RS232C serial interface via a fibre optic cable. A fibre optic port is treated the same way as a standard serial port except a fibre optic cable is used for the communications medium.
A fibre optic link offers excellent electrical isolation and a high data rate. Two fibre optic cables are required for each fibre optic port.
Two female ST connectors are fitted to the option board, one for Transmit (TX), and one for Recieve (RX)
Overview
- Fibre optic serial option board
- 115.2 Kbp/s speed
- Fits CP-10, CP-11, CP-21, CP-30, MC-10, MC-11, LP-1
Order Information
- COMMS-OPTION-F (Fibre Optic Serial for CP-11/CP-21/MC-11, option port 2/3)
Datasheets
| Product specifications: | |
| General | |
| Maximum Baudrate | 115.2 Kbps (equivalent to RS232 port) |
| Communications | No parity bit, 8 data bits, 1 stop bit |
| Maximum Fibre Optic Cable Length | Approx. 4km (depends on cable and other factors) |
| Supported Fibre Optic Cables | Multimode 50/125 um, 62.5/125um, 100/140 um, and 200 um HCS |
| Configuration Software | Toolbox |
| Option Board Connectors |
(use male connectors on cable) Tx: ST female (light grey port) Rx: ST female (dark grey port) |
| Power Consumption | (Tx) 200 mA max. from +5VDC Bus on backplane |
| Line drive | 1 Receiver (point to point) |
| Electrical Isolation | 15 kV |
| Environmental | |
| Operating Temperature | -20°C to 70°C / -4°F to 158°F |
| Storage Temperature | -40°C to 85°C / -40°F to 185°F |
| Operating Humidity | 5 to 98% RH non-condensing |
Fiber Serial Communications
