DO-6 Open Drain Output — 16-Channel I/O Module
Features:
The DO-6 provides 16 open drain NFET outputs for controlling various loads including the TELREL series of relay boards. Power for external loads can be provided from the modules +12 VDC which is sourced from the backplane rail.
The DO-6 output channels are current limited and are protected from high levels of EMI (electro-magnetic interference) that may trigger false outputs.
Overview
- 16 Open-drain outputs
- Designed to operate the TELREL 00x relay board
- DC Field Output (non-isolated)
Order Information
- DO-6-1 (Open Drain Digital Output - 16 channel)
| DO-6 Channel Open Drain Output Module Specifications | ||
| Outputs per Module | 16 | |
| Commons | 1 | |
| Rated Voltage | 30 VDC maximum. | |
| Output Type | N-FET, Open Drain | |
| Isolation | None | |
| Rated Load | 70 mA per channel | |
| Current Limit | 90 mA per channel | |
| Output Power | 12 VDC @ 1.6 A, non-isolated, supplied by module | |
| On Response Time | 15 ms maximum | |
| Off Response Time | 15 ms maximum | |
| Operating Temperature | -20 to 70 °C | |
| Storage Temperature | -40 to +85 °C | |
| Operating Humidity | 5 to 98% RH non-condensing | |
| Hot Swap | Yes. Module can be swapped while RTU is running. Hot swap will not cause a Warm Start. Outputs will be restored within 2 seconds once module is replaced. | |
| Compatibility | The DO-6 is functionally equivalent and pin compatible with the superseded DO-5. | |
This module provides 16 open drain output circuits for controlling the TEL REL 00x relay board.
