CP-12 Processor Module
Features:
The CP-12 processor module has up to three independent communication ports. Ports 2 and 3 can house option boards while port 1 is a fixed serial port (RS232C).
This processor is targeted at the application space that is too complex for the PC-1 but does not required the additional features made available with a CP-30 based system. The CP-12 has extended functionality over the PC-1 such as redundant processor and communications support, and is compatible with Ethernet based boards.
The CP-12 uses the same configuration software as the PC-1 processor, and as such is programmable with ladder logic. It does not support the additional languages outlined in IEC 61131.
The CP-12 has 512 KB of flash memory for operating code and system parameter storage, and 512 KB of battery backed SRAM for all configuration and event storage data.
Overview
- Support for Processor and Communications Redundancy
- Up to 3 communications ports
- 40 MHz x86 CPU
Order Information
- CP-12-xx
Note: xx denotes that the processor module can be delivered with up to 2 option boards preloaded at time of shipping. Please advise your Kingfisher dealer if you require any option boards preloaded.
Example: CP-12-ID
CP-12 fitted with Option I (Isolated serial) and Option D (PSTN modem)
| PROCESSOR SPECIFICATIONS | ||
| Processor | 40 MHz x86 | |
| Word Size | 16 bit data bus | |
| Clock Speed | 40 MHz | |
| BIOS | Yes | |
| FLASH Membory | 512 KB | |
| Static CMOS RAM | 512 KB | |
| Battery Type | Lithium Primary (not rechargeable) | |
| Battery Life - module unpowered | 7 years @ 25°C | |
| Battery Replacement | At above intervals | |
| Real-time clock | Yes. Accuracy + 1 min/month | |
| Watchdog timer | Yes | |
| Status Indication | Yes | |
| Communication Ports | 1-3 (1 fixed, 2 option ports) | |
| Port 1 (RS232) | 300 to 115200 Baud (factory default=9600 bps) | |
| Port 2 and 3 (Optional) | Select from A3, D, F, H, I, L, D2, D3, D4, T3 options | |
| Configuration Software | Toolbox32 | |
| RTU Address Range | 1 - 249 (expandable to 2000 by using multiple masters) | |
| Communications Protocol | Kingfisher, Modbus + many more | |
| Default Data Format | 8 data bits, no parity, 1 stop (8, N, 1) | |
| Analog Block Processing | Yes | |
| PID Block Processing | Yes | |
| Redundancy | Yes. Two CP-12 modules can be installed in the one RTU. One processor module must be installed in an odd numbered slot and one in an even numbered slot. | |
| Internal Power Consumption | 275 mA from +5 VDC bus on backplane | |
| I/O Bus Data Rate | 250 kbps | |
| CM Bus Data Rate | 83 kbps | |
| Operating Temperature | -20 to 70 °C | |
| Storage Temperature | -40 to 85 °C | |
| Operating Humidity | 5 to 98% RH non-condensing | |
| Hot Swap | Yes. When 2 processors are present on the backplane, one processor can be swapped while the RTU is still running. However, a hot swap will cause a Warm Start of the remaining processor. All ports will be re-initialized and ready for communications within 6 seconds. New data received during the changeover may be lost. To preserve data and for more information please see the Redundancy appendix in the Toolbox 32 manual. | |
The processor modules provide all processing, I/O scanning, logic, control, and communications functions required in any of the RTU configurations that may be adopted.
